#How to wipe a mac clean for a new user software
#How to wipe a mac clean for a new user password

This restores the default system settings without deleting the user data. Reset SettingsД¬omparable to the 10 second button press mentioned in the Hardware resets section earlier. This will reset the system settings to its defaults and it will also format all of the volumes currently in the unit. Restore Factory Defaults & Format All Volumes To locate these options, open Control Panel > Backup / Restore > Restore to Factory DefaultДЈ.

#How to wipe a mac clean for a new user software

Software resets executed from the QTS interface (web browser)

To retrieve the old data after an advanced system reset you need to create the same network shares on the NAS and the data will be accessible again.

This restores the default system settings without deleting the user data.

You will hear two beeps, one at 3 seconds and one at 10 seconds to let you know the reset has been successful. Please refer to the picture above and hold the reset button for 10 seconds. Ten second press and hold of the reset button Service binding: All NAS services run on all available network interfaces.Дў. Security level: Low (Allow all connections). TCP/IP configuration: If port trunking is enabled (dual LAN models only), the port trunking mode will be reset to вЂњActive Backup (Failover)вЂќ. TCP/IP configuration: Disable Jumbo Frame. TCP/IP configuration: Obtain IP address settings automatically via DHCP. Where to find the first MAC address on NAS?Дў.via MAC1 on the MAC Address sticker which can be found on the back of the NAS.

#How to wipe a mac clean for a new user password

The default password of admin is changed to the first MAC address of NAS in uppercase letters and without special characters.ДЇor instance, the First MAC address on TVS-871 is 00-08-9B-F6-15-75, The default password for admin on TVS-871 is 00089BF61575 The default password of admin is admin, You can login the NAS via admin/admin after resetting the NAS. Password for the admin account will be changed to the default password.Your data will not be deleted, but the following settings will be reset: You will hear a beep to let you know the reset has been successful. Please refer to the picture above and hold the reset button for 3 seconds. Three second press and hold of the reset button A little click can be felt when the button is pressed. Please find a sharp object such as a paperclip or pin and insert it to the hole located below the 'Reset' sign on the back of the unit. Hardware reset by the physical reset button located on the back of the unit These 5 methods can be divided into two others - reset button (hardware reset) and via the user interface (software reset). WeвЂ™re going to take a look at these and explain what exactly they will do to your configuration and data. There are essentially five different ways of resetting your NAS. Guideline for Choosing and Upgrading NAS.Video Surveillance Device Management System.Configure network settings (QNE Network).Configure network settings (QTS & QuTS hero).With Linux and ZFS, QuTS hero supports advanced data reduction technologies for further driving down costs and increasing reliablility of SSD (all-flash) storage. QuTS hero is the operating system for high-end and enterprise QNAP NAS models. WIth Linux and ext4, QTS enables reliable storage for everyone with versatile value-added features and apps, such as snapshots, Plex media servers, and easy access of your personal cloud. QTS is the operating system for entry- and mid-level QNAP NAS.